KONFIGURASI ROUTING RIPV2

KONFIGURASI ROUTING RIPV2

I. TOPOLOGI


 II. LANGKAH-LANGKAH


 KONFIGURASI ROUTER 1
 
Router>en
Router#conf ter
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 30.30.30.1 255.255.255.0
Router(config-if)#no sh
Router(config-if)#ex
Router(config)#int fa0/1
Router(config-if)#ip add 10.10.10.1 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
ex
Router(config)#int fa1/0
Router(config-if)#ip add 90.90.90.1 255.255.255.0
Router(config-if)#no sh
Router(config-if)#ex
Router(config)#int fa1/1
Router(config-if)#ip add 192.168.1.1 255.255.255.0
Router(config-if)#no sh
Router(config-if)#ex
Router(config)#ex


 KONFIGURASI ROUTER 2

 
Router>en
Router#conf ter
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 10.10.10.1 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
ex
Router(config)#int fa0/1
Router(config-if)#int fa0/0
Router(config-if)#ip add 30.30.30.0
% Incomplete command.
Router(config-if)#ip add 30.30.30.1 255.255.255.0
Router(config-if)#no sh
Router(config-if)#ex
Router(config)#int fa0/1
Router(config-if)#ip add 10.10.10.1 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
ex
Router(config)#int fa1/0
Router(config-if)#ip add 90.90.90.1255.255.255.0
                         ^
% Invalid input detected at '^' marker.
               
Router(config-if)#ip add 90.90.90.1 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
ex
Router(config)#int fa1/1
Router(config-if)#ip add 192.168.1.1 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet1/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/1, changed state to up
ex
Router(config)#ex


 KONFIGURASI ROUTER 3

 
Router>en
Router#conf ter
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 10.10.10.1 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
ex
Router(config)#int fa0/1
Router(config-if)#ip add 30.30.30.1 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
ex

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet1/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/1, changed state to up
ex
Router(config)#ex

 KONFIGURASI ROUTER 4

 
Router>en
Router#conf ter
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 50.50.50.2 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
ex
Router(config)#int fa0/1
Router(config-if)#ip add 60.60.60.1 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
ex
Router(config)#ex

 KONFIGURASI ROUTER 5

Router>en
Router#conf ter
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 20.20.20.2 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
%IP-4-DUPADDR: Duplicate address 20.20.20.2 on FastEthernet0/0, sourced by 00D0.97E3.C301
%IP-4-DUPADDR: Duplicate address 20.20.20.2 on FastEthernet0/0, sourced by 00D0.97E3.C301
ex
Router(config)#int fa0/1
Router(config-if)#ip add 60.60.60.2 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
ex
Router(config)#int fa1/0
Router(config-if)#ip add 70.70.70.2 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
ex
Router(config)#int fa1/1
Router(config-if)#ip add 192.168.2.1 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet1/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/1, changed state to up
ex
Router(config)#ex
 






 KONFIGURASI ROUTER 6


Router>en
Router#conf ter
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int fa0/1
Router(config-if)#ip add 10.10.10.2 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
ex
Router(config)#int fa0/0
Router(config-if)#ip add 20.20.20.2 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
ex
Router(config)#ex




 KONFIGURASI ROUTER 7

 
Router>en
Router#conf ter
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 90.90.90.2 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
ex
Router(config)#int fa0/1
Router(config-if)#ip add 80.80.80.1 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
ex
Router(config)#ex

 KONFIGURASI ROUTER 8

Router>en
Router#conf ter
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 80.80.80.2 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#ex
Router(config)#int fa0/1
Router(config-if)#ip add 70.70.70.1 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
ex
Router(config)#ex


 
Setelah itu atur routing ya


R1


Router>en
Router#conf ter
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#do sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
       * - candidate default, U - per-user static route, o - ODR
       P - periodic downloaded static route

Gateway of last resort is not set

     10.0.0.0/24 is subnetted, 1 subnets
C       10.10.10.0 is directly connected, FastEthernet0/1
     30.0.0.0/24 is subnetted, 1 subnets
C       30.30.30.0 is directly connected, FastEthernet0/0
     90.0.0.0/24 is subnetted, 1 subnets
C       90.90.90.0 is directly connected, FastEthernet1/0
C    192.168.1.0/24 is directly connected, FastEthernet1/1
Router(config-router)#network 10.10.10.0
Router(config-router)#network 30.30.30.0
Router(config-router)#network 90.90.90.0
Router(config-router)#network 192.168.1.0
Router(config-router)#no-
Router(config-router)#no
Router(config-router)#no auto
Router(config-router)#no auto-summary
Router(config-router)#ex

R2


Router>en
Router#conf ter
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#do sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
       * - candidate default, U - per-user static route, o - ODR
       P - periodic downloaded static route

Gateway of last resort is not set

     30.0.0.0/24 is subnetted, 1 subnets
C       30.30.30.0 is directly connected, FastEthernet0/0
     40.0.0.0/24 is subnetted, 1 subnets
C       40.40.40.0 is directly connected, FastEthernet0/1
Router(config-router)#network 30.30.30.0
Router(config-router)#network 40.40.40.0
Router(config-router)#no auto
Router(config-router)#no auto-summary
Router(config-router)#ex

R3


Router>en
Router#conf ter
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#do sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
       * - candidate default, U - per-user static route, o - ODR
       P - periodic downloaded static route

Gateway of last resort is not set

     40.0.0.0/24 is subnetted, 1 subnets
C       40.40.40.0 is directly connected, FastEthernet0/0
     50.0.0.0/24 is subnetted, 1 subnets
C       50.50.50.0 is directly connected, FastEthernet0/1
Router(config-router)#network 40.40.40.0
Router(config-router)#network 50.50.50.0
Router(config-router)#no auto
Router(config-router)#no auto-summary
Router(config-router)#ex

 R4


Router>en
Router#
Router#conf ter
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#do sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
       * - candidate default, U - per-user static route, o - ODR
       P - periodic downloaded static route

Gateway of last resort is not set

     50.0.0.0/24 is subnetted, 1 subnets
C       50.50.50.0 is directly connected, FastEthernet0/0
     60.0.0.0/24 is subnetted, 1 subnets
C       60.60.60.0 is directly connected, FastEthernet0/1
Router(config-router)#network 50.50.50.0
Router(config-router)#network 60.60.60.0
Router(config-router)#no aut
Router(config-router)#no auto-summary
Router(config-router)#ex

 R5
Router#conf ter
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#do sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
       * - candidate default, U - per-user static route, o - ODR
       P - periodic downloaded static route

Gateway of last resort is not set

     20.0.0.0/24 is subnetted, 1 subnets
C       20.20.20.0 is directly connected, FastEthernet0/0
     60.0.0.0/24 is subnetted, 1 subnets
C       60.60.60.0 is directly connected, FastEthernet0/1
     70.0.0.0/24 is subnetted, 1 subnets
C       70.70.70.0 is directly connected, FastEthernet1/0
C    192.168.2.0/24 is directly connected, FastEthernet1/1
Router(config-router)#network 20.20.20.0
Router(config-router)#network 60.60.60.0
Router(config-router)#network 70.70.70.0
Router(config-router)#network 192.168.2.0
Router(config-router)#no aut
Router(config-router)#no auto-summary
Router(config-router)#ex



 R6
Router>en
Router#conf ter
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#do sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
       * - candidate default, U - per-user static route, o - ODR
       P - periodic downloaded static route

Gateway of last resort is not set

     10.0.0.0/24 is subnetted, 1 subnets
C       10.10.10.0 is directly connected, FastEthernet0/1
     20.0.0.0/24 is subnetted, 1 subnets
C       20.20.20.0 is directly connected, FastEthernet0/0
Router(config-router)#network 10.10.10.0
Router(config-router)#network 20.20.20.0
Router(config-router)#no au
Router(config-router)#no auto-summary
Router(config-router)#ex

 R7
Router>en
Router#conf ter
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#do sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
       * - candidate default, U - per-user static route, o - ODR
       P - periodic downloaded static route

Gateway of last resort is not set

     80.0.0.0/24 is subnetted, 1 subnets
C       80.80.80.0 is directly connected, FastEthernet0/1
     90.0.0.0/24 is subnetted, 1 subnets
C       90.90.90.0 is directly connected, FastEthernet0/0
Router(config-router)#network 80.80.80.0
Router(config-router)#network 90.90.90.0
Router(config-router)#no au
Router(config-router)#no auto-summary
Router(config-router)#ex

 R8
Router>en
Router#conf ter
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#do sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
       * - candidate default, U - per-user static route, o - ODR
       P - periodic downloaded static route

Gateway of last resort is not set

     70.0.0.0/24 is subnetted, 1 subnets
C       70.70.70.0 is directly connected, FastEthernet0/1
     80.0.0.0/24 is subnetted, 1 subnets
C       80.80.80.0 is directly connected, FastEthernet0/0
Router(config-router)#network 70.70.70.0
Router(config-router)#network 80.80.80.0
Router(config-router)#no su
Router(config-router)#no au
Router(config-router)#no auto-summary
Router(config-router)#ex


 
Setelah itu isi ip address laptop ya seperti ini

 
Laptop 0

Laptop 1



0 Response

Posting Komentar

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel